wangfq/DLD110SV4B
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

feat: 线圈重连逻辑对齐DLD154V4B spec — 断开不丢VD_FLAG, CAPVD=0快速收敛, g_disconnect_active状态跟踪

Browse Source
This commit is contained in:
wangfq
2026-07-20 16:33:05 +08:00
parent 47abba1542
commit e30955067f
1 changed files with 29 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files
BLE/DLD110S_Peripheral_28K/APP/peripheral_main.c
+29 -20
View File
@@ -53,6 +53,7 @@ uint32_t g_sys_freq = 0;
const uint8_t MAX_Store_Size = 80;
uint8_t g_loop_power_up_state = 0; // 开机启动时线圈是否连接
uint8_t g_disconnect_active = 0; // 当前线圈是否断开中 (1=断开)
__IO uint32_t TimingDelayInc;
/*===========================================================================
@@ -68,7 +69,7 @@ __IO uint32_t TimingDelayInc;
#define ENTRY_CONFIRM 3 // 进入确认: 连续 N 次低于阈值才判有车
#define FREEZE_TIMEOUT 1000 // 基线冻结超时: ~8.7s, 持续偏高且稳定后强制更新
#define FREEZE_STABILITY_RATE 2 // 冻结稳定性窗口: 参考值 +-2%
#define USE_FLATNESS_EXIT 1 // 1=平坦性三条件离开, 0=简单滞回防抖
// #define USE_FLATNESS_EXIT 1 // 1=平坦性三条件离开, 0=简单滞回防抖
#define WINDOW_ORIGIN 500 // 基线跟踪窗口 (500 窗 ~= 4.4s)
#define STABLE_SAMPLES 128 // 稳定期样本数 (~1.1s)
#define VARIATION_EVENT_TH 40 // BLE variation 事件阈值 (幅值基准 2^19, 对应旧代码的 5)
@@ -311,7 +312,7 @@ void para_store_init(void)
poll_sens_key();
g_loop_out_delay = g_loop_cng_unit.delay_time * 2; // 定时器以 50ms 为单位, 延时以100ms为单位
g_hold_time = g_loop_cng_unit.exist_mode * 30 * 20; //50ms/per, 30s
g_hold_time = g_loop_cng_unit.exist_mode * 20 * 5; //50ms/per, period: 5s
g_safe_max_cnt = g_loop_cng_unit.loopSafe_Timeout * 10 * (1000 / 50);
g_freq_level = g_loop_cng_unit.loopFreq_Level - 1;
g_function_mode = g_loop_cng_unit.direction_mode >> 4;
@@ -487,6 +488,7 @@ void INIT_VD(void)
loop1_FLAG_PLUSE_IN = 0;
loop1_FLAG_CUT = 0;
loop1_FLAG_HOLD_TIMEOUT = 0;
g_disconnect_active = 0;
loop1_VD_HOLD = 0;
Hold_CNT = 0;
@@ -773,9 +775,16 @@ void cjq_srv(void){
return;
}
if(loop1_FLAG_CUT){
/* 线圈断开后重连: 全复位, 重新自适应测量窗并重建基线 */
g_loop_cut_last = 0;
INIT_VD();
/* 线圈断开后重连: 不丢 VD_FLAG, CAPVD=0 直锁首个样本快速收敛 */
g_disconnect_active = 0;
loop1_FLAG_CUT = 0;
loop1_CAPVD = 0; // 首个样本直锁, 跳过 IIR
loop1_ORG_CNT = 0; // 丢弃断开期间过期数据
loop1_ORG_SUM = 0;
if(loop1_Origin == 0) {
/* Origin 意外丢失: 全复位 (不应发生, 做防御) */
INIT_VD();
}
return;
}
if(!loop1_LOOP_OK0){
@@ -793,14 +802,15 @@ void cjq_srv(void){
}// end if loop1_LOOP_OK
else{
loop1_FLAG_CUT = 1;
loop1_VD_FLAG = 0;
g_disconnect_active = 1;
// 不丢 VD_FLAG (保留有车状态, 重连后恢复)
loop1_FLAG_IN = 0;
loop1_FLAG_OUT = 0;
loop1_FLAG_PLUSE = 0;
loop1_FLAG_PLUSE_IN_F = 0;
loop1_FLAG_PLUSE_IN = 0;
// 线圈断开: 继电器释放, 车辆状态清零
// 线圈断开: 继电器释放
RLY1_OFF; RLY2_OFF;
g_loop_acs_info.relay1_state = 0;
g_loop_acs_info.relay2_state = 0;
@@ -810,8 +820,8 @@ void cjq_srv(void){
g_loop_cut_last = loop1_FLAG_CUT;
if(g_loop_power_up_state){
g_loop_cut_amount++;
if(g_loop_cut_amount >= 255){
g_loop_cut_amount = 255;
if(g_loop_cut_amount > 3){
g_loop_cut_amount = 3;
}
}
}
@@ -1021,23 +1031,22 @@ void TMR1_IRQHandler(void)
TimingDelayInc++;
u32CountWdt++;
/*--- LED: 稳定期 200ms 快闪; 线圈断开 150ms 快闪 ---*/
if(loop1_FLAG_CUT == 0)
/*--- LED: 断开中 200ms 快闪; 稳定期 200ms 慢闪 ---*/
if(g_disconnect_active || !g_loop_power_up_state)
{
if(!g_loop_stable)
/* 线圈断开中 / 上电从未连接 → 200ms 快闪 (故障指示) */
_counter1_init++;
if(_counter1_init >= 40) // 40: 200ms
{
_counter1_init++;
if(_counter1_init >= 40) // 40: 200ms
{
_counter1_init = 0;
LEDA_ON_OFF();
}
_counter1_init = 0;
LEDA_ON_OFF();
}
}
else
else if(!g_loop_stable)
{
/* 稳定期 → 200ms 慢闪 (自检中) */
_counter1_init++;
if(_counter1_init >= 30) // 30: 150ms
if(_counter1_init >= 40) // 40: 200ms
{
_counter1_init = 0;
LEDA_ON_OFF();