feat: BLE 新增 RS485 地址/波特率读写 + 空闲关蓝牙超时 + 功能码细分

- 新增 CMD_DBN_RW_UART_BAUD (0x31): 读写 RS485 波特率、485 地址、空闲关蓝牙超时
- storage.h: 新增 flash 地址 ADDR_BT_Close_TIMEOUT_Offset(0x10)、Addr_RS485_Baud_Offset(0x11,3B)、Addr_RS485_ID_Offset(0x14)
- 功能码细分: g_function_mode bit0→fm_700bs_disable(0=700BS/1=Modbus), bit1→fm_radar_input_disable(0=光耦/1=复位)
- factory_dev 出厂默认: RS485 ID=1, 波特率=9600, 蓝牙超时=0
- para_store_init 上电从 flash 恢复所有新增配置

BLE/DLD154Pro_Peripheral_28K/APP/include/cmcng.h

@@ -41,11 +41,19 @@ extern uint32_t g_loop_cut_amount;
 extern uint8_t g_loop_power_up_state;
 
 extern uint8_t g_function_mode;
+extern uint8_t g_fm_700bs_disable ;         //0: 700bs protocol; 1 Modbus protocol
+extern uint8_t g_fm_radar_input_disable;   //0: radar input enable; 1 reset
 
 /* 新算法状�? (DLD154V4B 移植) */
 extern uint8_t g_loop_stable;       // 稳定期结束标�? (0=收敛�?, 1=稳定)
 extern uint8_t g_env_activity;      // 环境活跃�? (BLE condition 字段来源)
 
+extern uint8_t g_storage_uart_num;
+extern uint32_t g_storage_uart_baud;
+extern uint8_t g_max_counter_bt_min;
+extern uint32_t g_max_counter_bt_timeout;
+extern uint8_t g_rs485_id;
+
 uint32_t mstick(void);
 
 #endif /* INCLUDE_CMCNG_H_ */

BLE/DLD154Pro_Peripheral_28K/APP/include/dbn_ble_srv.h

@@ -52,6 +52,8 @@
 // #define CMD_SET_RELAY                   0xC4
 #define CMD_SENS_ACS_ENABLE             0xC5         // 设备主动上报  使能
 
+#define     CMD_DBN_RW_UART_BAUD                 0x31
+
 
 
 

BLE/DLD154Pro_Peripheral_28K/APP/include/storage.h

@@ -26,12 +26,20 @@
 // #define  Addr_Release_Rate_Weight           0x1E
 // #define  Addr_Release_Rate_Mode             0x1F
 
+#define     ADDR_BT_Close_TIMEOUT_Offset       0x10
+#define     Addr_RS485_Baud_Offset             0x11   // 3 byte
+#define     Addr_RS485_ID_Offset               0x14   // 1 byte
+
+
 #define  Addr_Loop_Sens_List_Offset         0x20
 
 #define Addr_Sens_Array_In                  0x20
 #define Addr_Sens_Array_Out                 0x30
 
 
+#define   RS_BAUD_DEFAULT                   9600
+
+
 #define            MAX_LOOP_SENS_AMOUNT     3   // 4   // 5
 
 #pragma pack(1)