wangfq
441a3e61cb
- 新增 CMD_DBN_RW_UART_BAUD (0x31): 读写 RS485 波特率、485 地址、空闲关蓝牙超时 - storage.h: 新增 flash 地址 ADDR_BT_Close_TIMEOUT_Offset(0x10)、Addr_RS485_Baud_Offset(0x11,3B)、Addr_RS485_ID_Offset(0x14) - 功能码细分: g_function_mode bit0→fm_700bs_disable(0=700BS/1=Modbus), bit1→fm_radar_input_disable(0=光耦/1=复位) - factory_dev 出厂默认: RS485 ID=1, 波特率=9600, 蓝牙超时=0 - para_store_init 上电从 flash 恢复所有新增配置
196 lines
5.3 KiB
C
196 lines
5.3 KiB
C
/*
|
|
* storage.h
|
|
*
|
|
* Created on: Aug 27, 2024
|
|
* Author: Thinkpad
|
|
*/
|
|
|
|
#ifndef INCLUDE_STORAGE_H_
|
|
#define INCLUDE_STORAGE_H_
|
|
|
|
#include <stdint.h>
|
|
|
|
|
|
// #define Addr_Loop_PlanB_Cng_Offset 0x10
|
|
// #define Addr_Flag_Sample_In 0x10
|
|
// #define Addr_Sample_Max_Amplitude 0x11
|
|
// #define Addr_Flag_Balance_Ori_In 0x13
|
|
// #define Addr_Balance_Ori_In_Max_Cnt 0x14
|
|
// #define Addr_Flag_Release_Ori_PlanB 0x16
|
|
// #define Addr_Release_Ori_PlanB_TimeOut 0x17
|
|
// #define Addr_Release_Ori_PlanB_Weight 0x18
|
|
// #define Addr_Release_Ori_Amplitude 0x19
|
|
// #define Addr_Flag_Release_Rate 0x1B
|
|
// #define Addr_Release_Rate_First 0x1C
|
|
// #define Addr_Release_Rate_Second 0x1D
|
|
// #define Addr_Release_Rate_Weight 0x1E
|
|
// #define Addr_Release_Rate_Mode 0x1F
|
|
|
|
#define ADDR_BT_Close_TIMEOUT_Offset 0x10
|
|
#define Addr_RS485_Baud_Offset 0x11 // 3 byte
|
|
#define Addr_RS485_ID_Offset 0x14 // 1 byte
|
|
|
|
|
|
#define Addr_Loop_Sens_List_Offset 0x20
|
|
|
|
#define Addr_Sens_Array_In 0x20
|
|
#define Addr_Sens_Array_Out 0x30
|
|
|
|
|
|
#define RS_BAUD_DEFAULT 9600
|
|
|
|
|
|
#define MAX_LOOP_SENS_AMOUNT 3 // 4 // 5
|
|
|
|
#pragma pack(1)
|
|
|
|
typedef struct _Loop_Sample_CNG_
|
|
{
|
|
uint8_t flag;
|
|
uint16_t max_amplitude; // 最大幅值
|
|
}Loop_Sample_Cng;
|
|
|
|
typedef struct _Loop_Balance_Ori_CNG_
|
|
{
|
|
uint8_t flag;
|
|
uint16_t max_cnt ; // 最大补偿次数
|
|
}Loop_Balance_Ori_Cng; // 漂移补偿
|
|
|
|
typedef struct _Loop_Release_Ori_PlanB_
|
|
{
|
|
uint8_t flag_weight;
|
|
uint16_t max_amplitude; //最大幅值
|
|
uint8_t timeout; // 单位：分钟
|
|
}Loop_Release_Ori_PlanB;
|
|
|
|
typedef struct _Loop_Release_Change_Rate_
|
|
{
|
|
uint8_t flag_weight;
|
|
uint8_t rate_first;
|
|
uint8_t rate_second;
|
|
uint8_t mode;
|
|
}Loop_Release_Change_Rate;
|
|
|
|
|
|
typedef struct _Loop_Balance_PlanB_
|
|
{
|
|
Loop_Sample_Cng sample_cng;
|
|
Loop_Balance_Ori_Cng balance_ori_cng;
|
|
Loop_Release_Ori_PlanB release_ori_planB;
|
|
Loop_Release_Change_Rate release_change_rate;
|
|
}Loop_Balance_PlanB;
|
|
|
|
extern Loop_Balance_PlanB g_loop_balance_planB;
|
|
|
|
|
|
typedef struct
|
|
{
|
|
uint8_t sensitvity; // 高四位表示灵敏度的数量，低四位表示当前灵敏度的序号（从0开始）
|
|
uint8_t delay_time;
|
|
uint8_t output_mode;
|
|
uint8_t direction_mode; // 方向判别模式，0 触发模式， 非0 表示方向判别模式
|
|
uint8_t loopFreq_Level; // 高低频
|
|
uint8_t loopSafe_Timeout; // 线圈安全模式， 0表示关闭，非0表示开启，以10秒为单位
|
|
uint8_t exist_mode; // 0 永久存在，非0，表示有限存在的时间，单位为10秒
|
|
}Loop_Cng_Unit;
|
|
extern Loop_Cng_Unit g_loop_cng_unit;
|
|
|
|
typedef struct
|
|
{
|
|
uint16_t sens_in;
|
|
uint16_t sens_out;
|
|
}Loop_Single_Sens;
|
|
|
|
typedef struct
|
|
{
|
|
uint8_t total;
|
|
Loop_Single_Sens sens[MAX_LOOP_SENS_AMOUNT];
|
|
}Loop_Sens_List;
|
|
extern Loop_Sens_List g_loop_sens_list;
|
|
|
|
|
|
|
|
typedef struct _DBN_BLE_STATE_
|
|
{
|
|
uint8_t flag; // if need to report
|
|
uint8_t enable; // 是否使能
|
|
uint8_t send_flag;
|
|
uint8_t obj_amount;
|
|
uint8_t cmd;
|
|
uint8_t sens_type;
|
|
uint8_t dat_len ;
|
|
uint8_t dat_offset;
|
|
uint8_t pkg_amount;
|
|
uint8_t pkg_seq;
|
|
uint16_t interval;
|
|
uint32_t counter;
|
|
uint8_t timeout_min; // minute
|
|
uint32_t timeout_counter;
|
|
} DBN_BLE_State;
|
|
|
|
extern DBN_BLE_State g_dbn_ble_state_acs_enable;
|
|
|
|
|
|
typedef enum
|
|
{
|
|
SENS_NONE = 0,
|
|
SENS_SUB_INFO = 1, // 传感器设备信息
|
|
SENS_OBJ_DYNAMIC = 2, // 动态目标类型
|
|
SENS_SOUTPUT_STATUS = 3, // 当前开关量输出的状态
|
|
SENS_DETAIL_CNG = 4, // 详细配置
|
|
SENS_LOOP_DYNAMIC = 5, // 线圈动态信息
|
|
SENS_OBJ_BackGround = 6, //
|
|
SENS_OBJ_INSIDE = 7, //
|
|
SENS_LOOP_TREND,
|
|
SENS_OBJ_DYNAMIC_SIMPLE,
|
|
SENS_OBJ_STATIC_XuJing, //10, 0x0A
|
|
SENS_DOBULE_LOOP_ESTIMATE //0x0B, 线圈环境评估
|
|
} SUB_SENS_TYPE; // 传感数据类型
|
|
|
|
|
|
|
|
typedef struct _LOOP_ACS_INFO
|
|
{
|
|
uint8_t flag_event;
|
|
uint8_t loop_num;
|
|
uint8_t freq_level;
|
|
uint8_t sensity;
|
|
uint8_t relay1_cng;
|
|
uint8_t relay1_state;
|
|
uint8_t relay2_cng;
|
|
uint8_t relay2_state;
|
|
uint8_t loop_state;
|
|
uint8_t output_mode;
|
|
uint8_t dir_mode;
|
|
uint8_t delay;
|
|
uint8_t car_state;
|
|
uint8_t direction;
|
|
uint8_t flag_loop_safe;
|
|
uint32_t loop_safe_counter;
|
|
uint8_t condition;
|
|
uint8_t flag_change;
|
|
uint32_t frequent;
|
|
uint32_t loop_capvd;
|
|
int32_t variation;
|
|
uint32_t event_counter;
|
|
uint32_t report_counter;
|
|
} Loop_ACS_Info;
|
|
extern Loop_ACS_Info g_loop_acs_info;
|
|
|
|
|
|
#pragma pack()
|
|
|
|
|
|
#define HOLD_TIME 5*1200
|
|
#define LC_HOLD_TIME 4*1200 //时间4分钟
|
|
#define IN_DELAY 10
|
|
#define OUT_DELAY 39
|
|
#define PLUSE_DELAY 10
|
|
|
|
|
|
void write_cfg_to_store(uint32_t wAddr, uint8_t * p, uint32_t len);
|
|
void read_cfg_from_store(uint32_t addr, uint8_t *p, uint32_t len);
|
|
|
|
|
|
#endif /* INCLUDE_STORAGE_H_ */
|