init: DLD154V4B 单路车检器项目
This commit is contained in:
wangfq
232
project/at32f421_board/at32f421_board.h
Normal file
232
project/at32f421_board/at32f421_board.h
Normal file
@@ -0,0 +1,232 @@
|
||||
/**
|
||||
**************************************************************************
|
||||
* @file at32f421_board.h
|
||||
* @brief header file for at-start board. set of firmware functions to
|
||||
* manage leds and push-button. initialize delay function.
|
||||
**************************************************************************
|
||||
* Copyright notice & Disclaimer
|
||||
*
|
||||
* The software Board Support Package (BSP) that is made available to
|
||||
* download from Artery official website is the copyrighted work of Artery.
|
||||
* Artery authorizes customers to use, copy, and distribute the BSP
|
||||
* software and its related documentation for the purpose of design and
|
||||
* development in conjunction with Artery microcontrollers. Use of the
|
||||
* software is governed by this copyright notice and the following disclaimer.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
|
||||
* GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
|
||||
* TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
|
||||
* STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
|
||||
* INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
|
||||
*
|
||||
**************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef __AT32F421_BOARD_H
|
||||
#define __AT32F421_BOARD_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include "stdio.h"
|
||||
#include "at32f421.h"
|
||||
|
||||
/** @addtogroup AT32F421_board
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup BOARD
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup BOARD_pins_definition
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* this header include define support list:
|
||||
* 1. at-start-f421 v1.x boards
|
||||
* if define AT_START_F421_V1, the header file support at-start-f421 v1.x board
|
||||
*/
|
||||
|
||||
#if !defined (AT_START_F421_V1)
|
||||
#error "please select first the board at-start device used in your application (in at32f421_board.h file)"
|
||||
#endif
|
||||
|
||||
/******************** define led ********************/
|
||||
typedef enum
|
||||
{
|
||||
LED2 = 0,
|
||||
LED3 = 1,
|
||||
LED4 = 2
|
||||
} led_type;
|
||||
|
||||
#define LED_NUM 3
|
||||
|
||||
#if defined (AT_START_F421_V1)
|
||||
#define LED2_PIN GPIO_PINS_1
|
||||
#define LED2_GPIO GPIOB
|
||||
#define LED2_GPIO_CRM_CLK CRM_GPIOB_PERIPH_CLOCK
|
||||
|
||||
#define LED3_PIN GPIO_PINS_10
|
||||
#define LED3_GPIO GPIOA
|
||||
#define LED3_GPIO_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
|
||||
#define LED4_PIN GPIO_PINS_11
|
||||
#define LED4_GPIO GPIOB
|
||||
#define LED4_GPIO_CRM_CLK CRM_GPIOB_PERIPH_CLOCK
|
||||
#endif
|
||||
|
||||
#define LED_RED_PIN GPIO_PINS_1
|
||||
#define LED_RED_GPIO GPIOB
|
||||
#define LED_GPIO_CRM_CLK CRM_GPIOB_PERIPH_CLOCK
|
||||
|
||||
#define LED_GREEN_PIN GPIO_PINS_9 // GPIO_PINS_13 //GPIO_PINS_9
|
||||
#define LED_GREEN_GPIO GPIOA
|
||||
#define LED_GREEN_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
|
||||
#define LED_YELLOW_PIN GPIO_PINS_10
|
||||
#define LED_YELLOW_GPIO GPIOA
|
||||
#define LED_YELLOW_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
|
||||
#define LEDB_OFF // gpio_bits_set(LED_RED_GPIO, LED_RED_PIN)
|
||||
#define LEDB_ON // gpio_bits_reset(LED_RED_GPIO, LED_RED_PIN)
|
||||
|
||||
#ifdef DEBUG
|
||||
#define LEDA_OFF
|
||||
#define LEDA_ON
|
||||
#else
|
||||
#define LEDA_OFF gpio_bits_set(LED_GREEN_GPIO, LED_GREEN_PIN)
|
||||
#define LEDA_ON gpio_bits_reset(LED_GREEN_GPIO, LED_GREEN_PIN)
|
||||
#endif
|
||||
|
||||
#define LEDC_OFF gpio_bits_set(LED_YELLOW_GPIO, LED_YELLOW_PIN)
|
||||
#define LEDC_ON gpio_bits_reset(LED_YELLOW_GPIO, LED_YELLOW_PIN)
|
||||
|
||||
#define LED_YELLOW_OFF LEDC_OFF
|
||||
#define LED_YELLOW_ON LEDC_ON
|
||||
|
||||
|
||||
|
||||
// RLY
|
||||
//#define RLY1_PIN GPIO_PINS_6
|
||||
//#define RLY1_GPIO GPIOA
|
||||
//#define RLY1_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
|
||||
//#define RLY2_PIN GPIO_PINS_5
|
||||
//#define RLY2_GPIO GPIOA
|
||||
//#define RLY2_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
|
||||
//功能继电器
|
||||
#define RLY1_PIN GPIO_PINS_5
|
||||
#define RLY1_GPIO GPIOA
|
||||
#define RLY1_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
|
||||
// 固定继电器 存在继电器
|
||||
#define RLY2_PIN GPIO_PINS_6
|
||||
#define RLY2_GPIO GPIOA
|
||||
#define RLY2_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
|
||||
#define RLY1_ON gpio_bits_set(RLY1_GPIO, RLY1_PIN)
|
||||
#define RLY1_OFF gpio_bits_reset(RLY1_GPIO, RLY1_PIN)
|
||||
#define RLY2_ON gpio_bits_set(RLY2_GPIO, RLY2_PIN)
|
||||
#define RLY2_OFF gpio_bits_reset(RLY2_GPIO, RLY2_PIN)
|
||||
|
||||
|
||||
/**************** define print uart ******************/
|
||||
#define PRINT_UART USART1
|
||||
#define PRINT_UART_CRM_CLK CRM_USART1_PERIPH_CLOCK
|
||||
#define PRINT_UART_TX_PIN GPIO_PINS_9
|
||||
#define PRINT_UART_TX_GPIO GPIOA
|
||||
#define PRINT_UART_TX_GPIO_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
#define PRINT_UART_TX_PIN_SOURCE GPIO_PINS_SOURCE9
|
||||
#define PRINT_UART_TX_PIN_MUX_NUM GPIO_MUX_1
|
||||
|
||||
/******************* define button *******************/
|
||||
typedef enum
|
||||
{
|
||||
USER_BUTTON = 0,
|
||||
NO_BUTTON = 1
|
||||
} button_type;
|
||||
|
||||
#define USER_BUTTON_PIN GPIO_PINS_0
|
||||
#define USER_BUTTON_PORT GPIOA
|
||||
#define USER_BUTTON_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
|
||||
// 灵敏度L
|
||||
#define SW1_BUTTON_PIN GPIO_PINS_0
|
||||
#define SW1_BUTTON_PORT GPIOA
|
||||
#define SW1_BUTTON_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
// 灵敏度H
|
||||
#define SW2_BUTTON_PIN GPIO_PINS_1
|
||||
#define SW2_BUTTON_PORT GPIOA
|
||||
#define SW2_BUTTON_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
// 输出方式
|
||||
#define SW3_BUTTON_PIN GPIO_PINS_2
|
||||
#define SW3_BUTTON_PORT GPIOA
|
||||
#define SW3_BUTTON_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
// 延时
|
||||
#define SW4_BUTTON_PIN GPIO_PINS_3
|
||||
#define SW4_BUTTON_PORT GPIOA
|
||||
#define SW4_BUTTON_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
// 安全复位
|
||||
#define SW5_BUTTON_PIN GPIO_PINS_4
|
||||
#define SW5_BUTTON_PORT GPIOA
|
||||
#define SW5_BUTTON_CRM_CLK CRM_GPIOA_PERIPH_CLOCK
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup BOARD_exported_functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/******************** functions ********************/
|
||||
void at32_board_init(void);
|
||||
void loop_timer_io_init(void);
|
||||
|
||||
/* led operation function */
|
||||
void at32_led_init(led_type led);
|
||||
void at32_led_on(led_type led);
|
||||
void at32_led_off(led_type led);
|
||||
void at32_led_toggle(led_type led);
|
||||
|
||||
/* button operation function */
|
||||
void at32_button_init(void);
|
||||
button_type at32_button_press(void);
|
||||
uint8_t at32_button_state(void);
|
||||
|
||||
/* delay function */
|
||||
void delay_init(void);
|
||||
void delay_us(uint32_t nus);
|
||||
void delay_ms(uint16_t nms);
|
||||
void delay_sec(uint16_t sec);
|
||||
|
||||
void poll_red_pwm(void);
|
||||
|
||||
/* printf uart init function */
|
||||
void uart_print_init(uint32_t baudrate);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
extern crm_clocks_freq_type g_crm_clocks_freq_struct;
|
||||
extern tmr_input_config_type g_tmr_input_config_struct;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
Reference in New Issue
Block a user