95808f9f25
- 用 DLD154V4B vd1_task/per_channel 替换 vds_task 复杂算法
- 移除 FUNCTION_B/二次判断/快速变化/多重确认等增强特性
- 保留平坦性离开算法 (CN200910309382)，每通道独立状态
- 灵敏度表改为 DLD154V4B 4级: {216,108,36,10} / {108,72,18,9}
- 清理废弃类型: FltHistoryManager, Loop_ACS_Info, StageRangeConfig 等
- 首次添加 vd960DBN 完整源码
361 lines
10 KiB
C
361 lines
10 KiB
C
/********************************** (C) COPYRIGHT *******************************
|
|
* File Name : main.c
|
|
* Author : WCH
|
|
* Version : V1.1
|
|
* Date : 2020/08/06
|
|
* Description : Peripheral slave application main function and task system initialization
|
|
*********************************************************************************
|
|
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
|
* Attention: This software (modified or not) and binary are used for
|
|
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
|
*******************************************************************************/
|
|
|
|
/******************************************************************************/
|
|
/* Header file contains */
|
|
#include "CONFIG.h"
|
|
#include "HAL.h"
|
|
#include "gattprofile.h"
|
|
#include "peripheral.h"
|
|
#include "cmcng.h"
|
|
#include <string.h>
|
|
#include "dbn_ble_srv.h"
|
|
#include "eth_driver.h"
|
|
#include "net_srv.h"
|
|
#include "storage.h"
|
|
|
|
/*********************************************************************
|
|
* GLOBAL TYPEDEFS
|
|
*/
|
|
__attribute__((aligned(4))) uint32_t MEM_BUF[BLE_MEMHEAP_SIZE / 4];
|
|
|
|
#define KEY_GPIO (RCC_APB2Periph_GPIOA)
|
|
#define KEY_BV BV(0)
|
|
#define KEY_IN (GPIO_ReadInputDataBit(KEY_GPIO, KEY_BV)==0)
|
|
#define HAL_PUSH_BUTTON() (KEY1_IN) //Add custom button
|
|
|
|
#if(defined(BLE_MAC)) && (BLE_MAC == TRUE)
|
|
const uint8_t MacAddr[6] = {0x84, 0xC2, 0xE4, 0x03, 0x02, 0x02};
|
|
// #else
|
|
// uint8_t MACAddr[6] = {0x84, 0xC2, 0xE4, 0x03, 0x02, 0x02};
|
|
#endif
|
|
uint8_t gMacAddr[6] = { 0x38, 0x3B, 0x26, 0x11, 0xA4 ,0x35 };
|
|
|
|
/* Used for app judgment file effectiveness */
|
|
const uint32_t Address = 0xFFFFFFFF;
|
|
|
|
__attribute__((aligned(4))) uint32_t Image_Flag __attribute__((section(".ImageFlag"))) = (uint32_t)&Address;
|
|
|
|
uint8_t g_dev_number[6] = ""; // É豸±àºÅ ²úÆ·±àºÅ
|
|
uint8_t g_dev_password[6] = {0x31, 0x32, 0x33, 0x34, 0x35, 0x36};
|
|
uint8_t g_ble_safe_flag = 0;
|
|
uint32_t g_ble_safe_counter_ori = 0;
|
|
uint32_t g_ble_safe_counter_dst = 0;
|
|
|
|
char g_flag_debug = 1;
|
|
|
|
uint8_t g_dg_device_type = DDType_DLD950V4; // ???¨¨¡À?????????????
|
|
uint8_t g_dg_sub_dev_type = DDType_DLD950V4;
|
|
|
|
Sub_Code_Enable g_sub_code_enable = {0,};
|
|
|
|
uint32_t g_activ_counter = 0;
|
|
|
|
uint32_t g_counter_bt_timeout = 0;
|
|
uint8_t g_flag_bt_state = 0;
|
|
uint8_t g_flag_bt_disable = 0;
|
|
|
|
uint8_t g_max_counter_bt_min = 0;
|
|
uint32_t g_max_counter_bt_timeout = 0; //BT_DISABLE_IDLE_TIMEOUT * 60 * 1000; // ms unit
|
|
|
|
|
|
__IO uint32_t TimingDelayInc;
|
|
__IO uint32_t TimingDelayDec;
|
|
|
|
uint8_t trigB;
|
|
Pkg_Uart g_pkg_uart_1 = { 0, 0, 0, "", 0};
|
|
Pkg_Uart g_pkg_uart_2 = { 0, 0, 0, "", 0};
|
|
|
|
Flag_Counter g_flag_counter_key = {0, 0, 0};
|
|
Flag_Counter g_flag_counter_ota = {0, 0, 0};
|
|
|
|
uint8_t g_storage_uart_num = 0;
|
|
uint32_t g_storage_uart_baud = 19200;//9600;
|
|
uint8_t g_storage_uart_num_2 = 1;
|
|
uint32_t g_storage_uart_baud_2 = 115200; //115200;
|
|
|
|
uint32_t mstick(void){
|
|
return TimingDelayInc;
|
|
}
|
|
|
|
|
|
void InitPkgUart(Pkg_Uart * pkg){
|
|
memset(pkg->pkg, 0, BUFF_STACK_SIZE);
|
|
pkg->flag = 0;
|
|
pkg->tick = 0;
|
|
pkg->len = 0;
|
|
pkg->offset = 0;
|
|
}
|
|
|
|
|
|
|
|
/*********************************************************************
|
|
* @fn TIM2_Init
|
|
*
|
|
* @brief Initializes TIM2.
|
|
*
|
|
* @return none
|
|
*/
|
|
void TIM2_Init( void )
|
|
{
|
|
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure={0};
|
|
|
|
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
|
|
|
|
TIM_TimeBaseStructure.TIM_Period = SystemCoreClock / 1000000;
|
|
TIM_TimeBaseStructure.TIM_Prescaler = WCHNETTIMERPERIOD * 1000 - 1;
|
|
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
|
|
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
|
|
TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
|
|
TIM_ITConfig(TIM2, TIM_IT_Update ,ENABLE);
|
|
|
|
TIM_Cmd(TIM2, ENABLE);
|
|
TIM_ClearITPendingBit(TIM2, TIM_IT_Update );
|
|
NVIC_EnableIRQ(TIM2_IRQn);
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn TIM3_Init
|
|
*
|
|
* @brief Initializes TIM3.
|
|
*
|
|
* @return none
|
|
*/
|
|
void TIM3_Init(void)
|
|
{
|
|
NVIC_InitTypeDef NVIC_InitStructure={0};
|
|
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure = { 0 };
|
|
|
|
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE);
|
|
|
|
////10ms
|
|
// TIM_TimeBaseStructure.TIM_Period = SystemCoreClock / 1000000;
|
|
// TIM_TimeBaseStructure.TIM_Prescaler = 10 * 1000 - 1;
|
|
|
|
//1ms
|
|
TIM_TimeBaseStructure.TIM_Period = SystemCoreClock / 1000000;
|
|
TIM_TimeBaseStructure.TIM_Prescaler = 1 * 1000 - 1;
|
|
|
|
|
|
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
|
|
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
|
|
TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure);
|
|
TIM_ITConfig(TIM3, TIM_IT_Update, ENABLE);
|
|
|
|
TIM_Cmd(TIM3, ENABLE);
|
|
TIM_ClearITPendingBit(TIM3, TIM_IT_Update);
|
|
NVIC_EnableIRQ(TIM3_IRQn);
|
|
}
|
|
|
|
|
|
void key_event_srv(void){
|
|
// if(g_flag_counter_key.tick > 1000){
|
|
// PRINT("key_tick_timeup_______: %d\n", GPIO_ReadInputDataBit(GPIOA, GPIO_Pin_0));
|
|
// g_flag_counter_key.tick = 0;
|
|
// }
|
|
if(g_flag_counter_key.flag){
|
|
uint8_t _pkg[7] = {0};
|
|
uint8_t i = 0;
|
|
switch (g_flag_counter_key.flag) {
|
|
case KEY_ET_BLE_ENABLE: {
|
|
PRINT("______KEY_ET_BLE_ENABLE\n");
|
|
NVIC_SystemReset();
|
|
} break;
|
|
case KEY_ET_REBOOT: {
|
|
PRINT("__________KEY_ET_REBOOT\n");
|
|
_pkg[i++] = 0x7F;
|
|
_pkg[i++] = 0x00;
|
|
_pkg[i++] = 0x01;
|
|
_pkg[i++] = 0x6D;
|
|
_pkg[i++] = 0x6C;
|
|
_pkg[i++] = 0x6E;
|
|
UART2_SendString(_pkg, i); //1 send loop mcu reboot;
|
|
|
|
Delay_Ms(10);
|
|
// 2 DBN dev reboot
|
|
NVIC_SystemReset();
|
|
} break;
|
|
case KEY_ET_FACTORY: {
|
|
PRINT("_____________KEY_ET_FACTORY\n");
|
|
_pkg[i++] = 0x7F;
|
|
_pkg[i++] = 0x00;
|
|
_pkg[i++] = 0x01;
|
|
_pkg[i++] = 0x92;
|
|
_pkg[i++] = 0x93;
|
|
_pkg[i++] = 0x93;
|
|
UART2_SendString(_pkg, i); //1 send loop mcu factory init
|
|
|
|
|
|
} break;
|
|
case KEY_ET_NETBLE_FACTORY: {
|
|
//2 DBN dev factory init;
|
|
factory_dev_info();
|
|
Delay_Ms(10);
|
|
|
|
NVIC_SystemReset();
|
|
} break;
|
|
|
|
}
|
|
g_flag_counter_key.flag = 0;
|
|
}
|
|
|
|
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* @fn Main_Circulation
|
|
*
|
|
* @brief Main loop
|
|
*
|
|
* @return none
|
|
*/
|
|
__attribute__((section(".highcode")))
|
|
__attribute__((noinline))
|
|
void Main_Circulation(void)
|
|
{
|
|
uint32_t _counter = 0;
|
|
while(1)
|
|
{
|
|
TMOS_SystemProcess();
|
|
|
|
if(g_net_state.flag < 2)
|
|
{
|
|
net_srv_init();
|
|
}
|
|
if(g_net_state.flag == 2)
|
|
{
|
|
if(g_sub_code_enable.iot_enable){
|
|
if(iot_net_info.mode == IOT_Addr_IP_Mode){
|
|
if(get_ipstr_to_array(iot_net_info.remote_addr, RemoteIP) == 0){
|
|
WCHNET_CreateTcpMqttSocket();
|
|
}
|
|
}
|
|
else{
|
|
//DNS
|
|
}
|
|
|
|
}
|
|
else
|
|
{
|
|
WCHNET_CreateTcpSocket();
|
|
}
|
|
}
|
|
|
|
|
|
/*Ethernet library main task function,
|
|
* which needs to be called cyclically*/
|
|
WCHNET_MainTask();
|
|
/*Query the Ethernet global interrupt,
|
|
* if there is an interrupt, call the global interrupt handler*/
|
|
if(WCHNET_QueryGlobalInt())
|
|
{
|
|
WCHNET_HandleGlobalInt();
|
|
}
|
|
|
|
uart_srv();
|
|
|
|
poll_dbn_ble();
|
|
|
|
key_event_srv();
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/*********************************************************************
|
|
* @fn main
|
|
*
|
|
* @brief Main function
|
|
*
|
|
* @return none
|
|
*/
|
|
int main(void)
|
|
{
|
|
SystemCoreClockUpdate();
|
|
Delay_Init();
|
|
#ifdef DEBUG
|
|
// USART_Printf_Init( 115200 );
|
|
USART_Printf_Init( 256000 );
|
|
#endif
|
|
PRINT("%s\n", VER_LIB);
|
|
PRINT("SystemCoreClock:%d\n", SystemCoreClock);
|
|
GetMacAddr(gMacAddr);
|
|
storage_init();
|
|
load_cfg_from_flash();
|
|
output_cfg_from_flash();
|
|
|
|
PRINT("MAC: %02X %02X %02X %02X %02X %02X\r\n", gMacAddr[0],gMacAddr[1], gMacAddr[2], gMacAddr[3],gMacAddr[4],gMacAddr[5]);
|
|
PRINT("net version:%x\n", WCHNET_GetVer());
|
|
WCHBLE_Init();
|
|
HAL_Init();
|
|
|
|
uart_init();
|
|
TIM3_Init();
|
|
TIM2_Init();
|
|
|
|
GAPRole_PeripheralInit();
|
|
Peripheral_Init();
|
|
Main_Circulation();
|
|
}
|
|
|
|
|
|
void TIM3_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
|
/*********************************************************************
|
|
* @fn TIM3_IRQHandler, 1ms
|
|
*
|
|
* @brief This function handles TIM2 exception.
|
|
*
|
|
* @return none
|
|
*/
|
|
void TIM3_IRQHandler(void)
|
|
{
|
|
TimingDelayInc++;
|
|
g_activ_counter++;
|
|
|
|
if(g_pkg_uart_2.offset){
|
|
if(g_pkg_uart_2.flag == 0){
|
|
g_pkg_uart_2.tick++;
|
|
if(g_pkg_uart_2.tick > 8){
|
|
g_pkg_uart_2.flag = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
if(GPIO_ReadInputDataBit(GPIOA, GPIO_Pin_0) == 0){//HAL_PUSH_BUTTON()){
|
|
g_flag_counter_key.tick++;
|
|
}
|
|
else{
|
|
if(g_flag_counter_key.tick){
|
|
if(g_flag_counter_key.tick < 2000){
|
|
g_flag_counter_key.flag = KEY_ET_BLE_ENABLE;
|
|
}
|
|
else if(g_flag_counter_key.tick < 6000){
|
|
g_flag_counter_key.flag = KEY_ET_REBOOT;
|
|
}
|
|
else if(g_flag_counter_key.tick < 10000){
|
|
g_flag_counter_key.flag = KEY_ET_FACTORY;
|
|
}
|
|
else{
|
|
g_flag_counter_key.flag = KEY_ET_NETBLE_FACTORY;
|
|
}
|
|
g_flag_counter_key.tick = 0;
|
|
}
|
|
}
|
|
|
|
|
|
TIM_ClearITPendingBit(TIM3, TIM_IT_Update);
|
|
}
|
|
|
|
|
|
/******************************** endfile @ main ******************************/
|