Files
vd_960/vd960DBN/SRC/Peripheral/src/ch32v20x_iwdg.c
T
wangfq 95808f9f25 refactor(vd960Loop): 算法回退到 DLD154V4B,四通道适配
- 用 DLD154V4B vd1_task/per_channel 替换 vds_task 复杂算法
- 移除 FUNCTION_B/二次判断/快速变化/多重确认等增强特性
- 保留平坦性离开算法 (CN200910309382),每通道独立状态
- 灵敏度表改为 DLD154V4B 4级: {216,108,36,10} / {108,72,18,9}
- 清理废弃类型: FltHistoryManager, Loop_ACS_Info, StageRangeConfig 等
- 首次添加 vd960DBN 完整源码
2026-06-25 16:21:57 +08:00

124 lines
3.8 KiB
C

/********************************** (C) COPYRIGHT *******************************
* File Name : ch32v20x_iwdg.c
* Author : WCH
* Version : V1.0.0
* Date : 2023/12/29
* Description : This file provides all the IWDG firmware functions.
*********************************************************************************
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
* Attention: This software (modified or not) and binary are used for
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
*******************************************************************************/
#include "ch32v20x_iwdg.h"
/* CTLR register bit mask */
#define CTLR_KEY_Reload ((uint16_t)0xAAAA)
#define CTLR_KEY_Enable ((uint16_t)0xCCCC)
/*********************************************************************
* @fn IWDG_WriteAccessCmd
*
* @brief Enables or disables write access to IWDG_PSCR and IWDG_RLDR registers.
*
* @param WDG_WriteAccess - new state of write access to IWDG_PSCR and
* IWDG_RLDR registers.
* IWDG_WriteAccess_Enable - Enable write access to IWDG_PSCR and
* IWDG_RLDR registers.
* IWDG_WriteAccess_Disable - Disable write access to IWDG_PSCR
* and IWDG_RLDR registers.
*
* @return none
*/
void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess)
{
IWDG->CTLR = IWDG_WriteAccess;
}
/*********************************************************************
* @fn IWDG_SetPrescaler
*
* @brief Sets IWDG Prescaler value.
*
* @param IWDG_Prescaler - specifies the IWDG Prescaler value.
* IWDG_Prescaler_4 - IWDG prescaler set to 4.
* IWDG_Prescaler_8 - IWDG prescaler set to 8.
* IWDG_Prescaler_16 - IWDG prescaler set to 16.
* IWDG_Prescaler_32 - IWDG prescaler set to 32.
* IWDG_Prescaler_64 - IWDG prescaler set to 64.
* IWDG_Prescaler_128 - IWDG prescaler set to 128.
* IWDG_Prescaler_256 - IWDG prescaler set to 256.
*
* @return none
*/
void IWDG_SetPrescaler(uint8_t IWDG_Prescaler)
{
IWDG->PSCR = IWDG_Prescaler;
}
/*********************************************************************
* @fn IWDG_SetReload
*
* @brief Sets IWDG Reload value.
*
* @param Reload - specifies the IWDG Reload value.
* This parameter must be a number between 0 and 0x0FFF.
*
* @return none
*/
void IWDG_SetReload(uint16_t Reload)
{
IWDG->RLDR = Reload;
}
/*********************************************************************
* @fn IWDG_ReloadCounter
*
* @brief Reloads IWDG counter with value defined in the reload register.
*
* @return none
*/
void IWDG_ReloadCounter(void)
{
IWDG->CTLR = CTLR_KEY_Reload;
}
/*********************************************************************
* @fn IWDG_Enable
*
* @brief Enables IWDG (write access to IWDG_PSCR and IWDG_RLDR registers disabled).
*
* @return none
*/
void IWDG_Enable(void)
{
IWDG->CTLR = CTLR_KEY_Enable;
while((RCC->RSTSCKR & 0x2)==RESET);
}
/*********************************************************************
* @fn IWDG_GetFlagStatus
*
* @brief Checks whether the specified IWDG flag is set or not.
*
* @param IWDG_FLAG - specifies the flag to check.
* IWDG_FLAG_PVU - Prescaler Value Update on going.
* IWDG_FLAG_RVU - Reload Value Update on going.
*
* @return none
*/
FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG)
{
FlagStatus bitstatus = RESET;
if((IWDG->STATR & IWDG_FLAG) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}